Energy bills tell you what your hospitality business has paid, but not necessarily why the cost is high. A practical guide published by UKHospitality suggests that operators start by identifying which systems use energy, and when they use it.
The guide points to different patterns across hospitality businesses. Restaurants and takeaways use much of their electricity for cooking. In pubs, cooking and cool storage, particularly cellar cooling, are highlighted as significant users. In hotels, heating, fans and air conditioning are major loads, alongside catering and lighting.
These figures relate to electricity only. Many kitchens and boilers also use gas, so a useful review should consider both fuels.
Start with your energy baseline
The guide recommends reviewing 12 months of bills and meter readings. This can help you compare busy and quiet periods, as well as winter and summer use. If costs change very little when the business is quieter, that may indicate a high fixed baseload.
Half-hourly data can show when energy is being used. The guide notes that this data is becoming more available as the industry moves to half-hourly settlement. Ask your supplier or energy provider what information is available for your premises.
Your overnight load is another useful starting point. Refrigeration, standby equipment, extraction and lights operating between closing and opening all contribute. An unexpectedly high overnight load gives you a clear area to investigate.
Walk the venue at closing time
A closing-time walk-round can reveal equipment that is left running unnecessarily. The guide specifically identifies fryers, extraction, display lighting, bottle fridges and glass washers as examples to check.
Refrigeration runs continuously, so its condition matters. The guide, referring to the Carbon Trust Guide for Hospitality, highlights worn door seals, dirty condenser coils, overstocking and poor placement as issues that can increase consumption.
Extraction can also waste energy when it removes heated or cooled air at full speed when that level is not needed. Hot-water thermostats and pipe insulation should be considered, while laundries, pools and spas should be assessed separately because they can be substantial loads.
Practical steps before major spending
The guide lists several low-cost or no-cost actions: use closing checklists, align equipment start times with service, clean condenser coils, maintain sound door seals and improve heating, cooling and extraction schedules.
Larger improvements, such as LED controls, efficient refrigeration and cooking equipment, variable-speed extraction and building-fabric work, may be easier to plan around equipment replacement, a lease event or refurbishment. Solar is also mentioned as an option for hospitality buildings, but tenants should check their lease first. Equipment ownership, energy costs and consent requirements may affect what is realistic.
Pravise’s practical advice is to begin with one documented check rather than commissioning work immediately. This week, collect 12 months of bills, check the overnight load and write down your three biggest energy users. Keep the findings with your business records so you have a baseline for future decisions.
If you ask for an energy audit, the guide suggests checking whether it covers every fuel and use, uses actual half-hourly data, breaks consumption down by system or area, and explains costs, savings, payback, assumptions and any commercial interest.
The source is industry commentary rather than official regulatory guidance. Check current official guidance before making compliance or building changes, and take account of your lease and any required permissions.
If you would like help organising practical checks and business paperwork, contact Pravise — your first call is free.
Sources and further reading
This article draws on reputable published sources and public enforcement reporting. It has not been fully verified case by case, so no individuals, companies or addresses are identified.
This article is general guidance, not advice about your particular site or premises. If you want it applied to your own job, the first call is free.